[MLX4] 1) added support for sending large multi-parameter messages to System Event...

[mirror/winof/.git] / hw / mlx4 / kernel / bus / core / ev_log.mc

diff --git a/hw/mlx4/kernel/bus/core/ev_log.mc b/hw/mlx4/kernel/bus/core/ev_log.mc
index 7eb7f3a..a00094a 100644 (file)
--- a/hw/mlx4/kernel/bus/core/ev_log.mc
+++ b/hw/mlx4/kernel/bus/core/ev_log.mc
@@ -48,9 +48,88 @@ MessageId=0x0002 Facility=MLX4 Severity=Warning SymbolicName=EVENT_MLX4_ANY_WARN
 Language=English\r
 %2\r
 .\r
-\r
 MessageId=0x0003 Facility=MLX4 Severity=Error SymbolicName=EVENT_MLX4_ANY_ERROR\r
 Language=English\r
 %2\r
 .\r
 \r
+MessageId=0x0004 Facility=MLX4 Severity=Error SymbolicName=EVENT_MLX4_ERROR_LIFEFISH_OK\r
+Language=English\r
+mlx4_bus has started in non-operational mode. \r
+.\r
+\r
+MessageId=0x0005 Facility=MLX4 Severity=Error SymbolicName=EVENT_MLX4_ERROR_LIFEFISH_FAIL\r
+Language=English\r
+mlx4_bus has failed to start even in non-operational mode.%n\r
+Look into the the previous error messages.\r
+.\r
+\r
+MessageId=0x0006 Facility=MLX4 Severity=Informational SymbolicName=EVENT_MLX4_INFO_DEV_STARTED\r
+Language=English\r
+mlx4_bus has been successfully started.%n\r
+The device parameters are:%n\r
+   vendor_id      %t%2%n\r
+   device_id      %t%3%n\r
+   subvendor_id   %t%4%n\r
+   subsystem_id   %t%5%n\r
+   HW revision    %t%6%n\r
+   FW version     %t%7.%8.%9%n\r
+   HCA guid       %t%10%11%n\r
+   HCA location   %t'%12'\r
+.\r
+\r
+MessageId=0x0007 Facility=MLX4 Severity=Error SymbolicName=EVENT_MLX4_ERROR_MAP_FA\r
+Language=English\r
+MAP_FA command failed with error %2.%n \r
+The adapter card is non-functional.%n\r
+Most likely a FW problem.%n\r
+Please burn the last FW and restart the mlx4_bus driver.\r
+.\r
+\r
+MessageId=0x0008 Facility=MLX4 Severity=Error SymbolicName=EVENT_MLX4_ERROR_RUN_FW\r
+Language=English\r
+RUN_FW command failed with error %2.%n\r
+The adapter card is non-functional.%n\r
+Most likely a FW problem.%n\r
+Please burn the last FW and restart the mlx4_bus driver.\r
+.\r
+\r
+MessageId=0x0009 Facility=MLX4 Severity=Error SymbolicName=EVENT_MLX4_ERROR_QUERY_FW\r
+Language=English\r
+QUERY_FW command failed with error %2.%n\r
+The adapter card is non-functional.%n\r
+Most likely a FW problem.%n\r
+Please burn the last FW and restart the mlx4_bus driver.\r
+.\r
+\r
+MessageId=0x000a Facility=MLX4 Severity=Warning SymbolicName=EVENT_MLX4_WARN_QUERY_FW\r
+Language=English\r
+Function disabled.%n\r
+This device is multi-functional.%n\r
+Please upgrade to a multi-function driver.\r
+.\r
+\r
+MessageId=0x000b Facility=MLX4 Severity=Error SymbolicName=EVENT_MLX4_ERROR_QUERY_DEV_CAP\r
+Language=English\r
+QUERY_DEV_CAP command failed with error %2.%n\r
+The adapter card is non-functional.%n\r
+Most likely a FW problem.%n\r
+Please burn the last FW and restart the mlx4_bus driver.\r
+.\r
+\r
+MessageId=0x000c Facility=MLX4 Severity=Error SymbolicName=EVENT_MLX4_ERROR_QUERY_ADAPTER\r
+Language=English\r
+QUERY_ADAPTER command failed with error %2.%n\r
+The adapter card is non-functional.%n\r
+Most likely a FW problem.%n\r
+Please burn the last FW and restart the mlx4_bus driver.\r
+.\r
+\r
+MessageId=0x000d Facility=MLX4 Severity=Error SymbolicName=EVENT_MLX4_ERROR_NOT_ENOUGH_QPS\r
+Language=English\r
+Too few QPs were requested (requested %2, reserved for FW %3).%n\r
+The adapter card is non-functional.%n\r
+Please increase the Registry LogNumQp parameter under HKLM\System\CurrentControlSet\Services\mlx4_bus\Parameters.\r
+.\r
+\r
+\r